Del 18 Electric Instant

No other instantaneous water heater with 3i technology has such a wide range of features as the DEL Plus. With backlit multifunction display, temperature memory, childproofing and ECO mode, it offers best-in-class comfort and convenience. The energy and water saving ECO mode can be used to limit the maximum flow rate of the DEL Plus to enable a constant DHW temperature, even where inlet temperatures are low.

  • Made in Germany
  • Maximum hot water output temperature 50° Celsius, no tempering valve needed
  • Available in 3 outputs
  • Electronically controlled continuous flow hot water delivery with 3i Technology
  • Temperature memory function keys
Enquire now Call us: 13 74 89
Product Description

Description

The DEL Plus is suitable for supplying hot water to several draw-off points (single and group supply), e.g. simultaneous supply to bathroom and kitchen. Sealed unvented, pressure-tested appliance for use with all commercially available pressure taps. The DEL Plus water heater requires no safe tray, flue or ventilation.

Electronically controlled instantaneous water heater with 3i technology. Accurate temperature delivery up to the maximum output. Temperature selection from 30 to 50°C via rotary selector, temperature adjustment for showers in 0.5 °C increments. Backlit multifunction display to show set temperature, current power consumption, status and service indication. Selectable ECO mode. Memory function for 2 programmable temperatures of choice. Pivoting appliance cover and programming unit for increased operating convenience in undersink installations.

Saves energy and water by means of electronic output control with 3i technology. 3 sensors ensure that the selected temperature is accurately achieved. For this, only the actual required amount of energy is expended; there is no need to add cold water at the tap. This ensures maximum energy efficiency. ECO mode can be individually selected for particularly economical operation. Suitable for preheated water (e.g. in solar thermal and heat pump systems).

Rapid bare wire heating system, suitable for hard and soft water. Electronic safety concept with air bubble detection

Product Specifications

Technical Specifications

Article Number
236741
Rated output (415V)
19.4kW
Rated current (415V)
27Amp
Phases
3/PE
Electrical Installation
As per AS/NZS3000
Installation requirements
AS/NZS3500.4.2 & local requirements
Switch on flow rate
2.5L/min
Permissible operating pressure
1000kPa
Temperature adjustment
20-50°C
IP Rating
IP25
Height
466mm
Width
225mm
Depth
116mm
Weight
3.2kg
Colour
White
Nominal capacity
0.4L
For one/several draw off points
Yes/Yes
Heating system
Bare wire
Accepts pre-heated water (solar)
Yes (must not exceed 50°C)
Programmable temperature
Yes
Manuals